Dfreeeze parking heater remote control Guía de instalación descargar pdf (Pagina 40)

Installation con guration 6 & 7

The installation congurations 6 & 7 describe the

connection of the dfreeeze

receiver to any parking heater

withswitchingoutputandinput,whichareconguredas

described below.

Inst. con guration 6: Receiver analogue clock

Any parking heater that is congured as described

below.

Switching output - Pin 3* 12V continuous signal

Switching input - Pin 4* 12V continuous signal

(for response)

Inst. con guration 7: Receiver analogue button

Any parking heater that is congured as described

below.

Switching output - Pin 3* 12V switching impulse

Switching input - Pin 4* 12V continuous signal

(for response)

*The information refers to the signals on the dfreeeze

receiver (plug X3).

If no feedback signal to pin 4 is present, the

proper function of the dfreeeze

cannot be

guaranteed.

Preparation of the adapter cable

● Connect the plug X3 as shown in the cable

diagram on the right.

Note the information on page 32 when

preparing the cable.

Connecting the dfreeeze

receiver

● Connect the plug connector with the respective

devices as shown in the system diagram to the

right.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 46 47 48

Sin comentarios

Dfreeeze parking heater remote control Guía de instalación Pagina 40